For the breaking hammer, the working efficiency is very high, but the quality of the hydraulic oil will directly affect the damage of the breaking hammer components and the normal operation of the breaking hammer. Therefore, we should take effective measures to prevent the oil circuit of the breaking hammer from being polluted:

1. The new breaking hammer needs to go through the running in period, but there will be wear debris. After the equipment is run in, the user needs to empty all the hydraulic oil in the oil tank, and after using the new oil circulation system, wipe all the oil tanks with cotton cloth before adding new oil to avoid pollution caused by iron filings.

2. Because the hydraulic oil tank is connected with the air, the dust and impurities in the air will enter the oil tank after a long time of use. Therefore, protective measures shall be taken during the operation of the hammer to prevent air and water from invading the hydraulic oil.

3. In order to prolong the service life of the breaking hammer, its parts and components shall be disassembled, lubricated and maintained in all aspects after one operation. Contamination of impurities during shutdown storage. Therefore, the components of the hydraulic system shall be carefully cleaned during the assembly process before re using the hammer, and the working oil shall be used as much as possible to ensure that there is no flash or burr on the seals.

4. The hydraulic oil in the hammer shall be of good quality. Before adding hydraulic oil to the hammer, it is necessary to settle for a period of time to avoid external pollution during the transportation of hydraulic oil.

Therefore, if the oil circuit of the hammer is found to be polluted, we should replace the seal of the hammer in time to prevent the pollution of the oil circuit due to aging or serious wear of the accessories.